K888
J&Z Tech
1. Traffic advisor priority
2. Alley & Take Down: Press the “POWER” button, all the lights flash together, alley lights and take down lights can be controlled separately. Press “ALLEY” or “TAKE DOWN” each time, the pattern changes as below:
Fixe —> Split —> Sync —> Off —> Pattern same to the main lights
3. CRUISE: 5 LED modules are fixed(steady on) at two sides.
4. LOW POWER: Press this button, the brightness of the lightbar will be 50% off.
5. Flash patterns: 19
Model no.: K888 Controller
(1). The left direction light in the back of light bar
(2). The middle to both sides direction light in the back of light bar
(3). The right direction light in the back of light bar
When we press any of the above buttons, the direction light priority, press button again, It will
flash with the whole light.
(4). LEFT ALLEY, TAKE DOWN, RIGHT ALLEY
Turn on power, the Left alley light and Right alley light and Takedown light will flash together with the whole light, they can also flash individually, there are total of 4 patterns, as following:
Steady Alternating flash Simultaneously flash Turn off
(5). FRONT: Turn off or turn on the flashing of the front LED modules.
(6). BACK: Turn off or turn on the flashing of the back LED modules.
(7). LOW POWER: When the button is turned on, the brightness of whole light bar is half.
(8). CRUISE: When the button is turned on, five LED modules on both sides are steady on.
(9). FLASH PATTERNS: Turn up or Turn down patterns:19 patterns
(10). POWER: Power switch.
Company Introduction
1. Traffic advisor priority
2. Alley & Take Down: Press the “POWER” button, all the lights flash together, alley lights and take down lights can be controlled separately. Press “ALLEY” or “TAKE DOWN” each time, the pattern changes as below:
Fixe —> Split —> Sync —> Off —> Pattern same to the main lights
3. CRUISE: 5 LED modules are fixed(steady on) at two sides.
4. LOW POWER: Press this button, the brightness of the lightbar will be 50% off.
5. Flash patterns: 19
Model no.: K888 Controller
(1). The left direction light in the back of light bar
(2). The middle to both sides direction light in the back of light bar
(3). The right direction light in the back of light bar
When we press any of the above buttons, the direction light priority, press button again, It will
flash with the whole light.
(4). LEFT ALLEY, TAKE DOWN, RIGHT ALLEY
Turn on power, the Left alley light and Right alley light and Takedown light will flash together with the whole light, they can also flash individually, there are total of 4 patterns, as following:
Steady Alternating flash Simultaneously flash Turn off
(5). FRONT: Turn off or turn on the flashing of the front LED modules.
(6). BACK: Turn off or turn on the flashing of the back LED modules.
(7). LOW POWER: When the button is turned on, the brightness of whole light bar is half.
(8). CRUISE: When the button is turned on, five LED modules on both sides are steady on.
(9). FLASH PATTERNS: Turn up or Turn down patterns:19 patterns
(10). POWER: Power switch.
Company Introduction